Rust removal method of steel pipe

　　It mainly uses steel wire brush and other tools to polish the steel surface, which can remove loose or raised oxide skin, rust, welding slag, etc.

　　Generally, chemical and electrolytic methods are used for pickling treatment. Chemical pickling is only used for pipeline corrosion protection, which can remove oxide skin, rust and old coating. Sometimes it can be used as the reprocessing after sand blasting. Although chemical cleaning can make the surface reach a certain degree of cleanliness and roughness, its anchor pattern is shallow and easy to pollute the environment.

　　Spray (throwing) rust removal is a high-speed rotation of spray (throwing) blades driven by a high-power motor, so that steel sand, steel shot, wire section, minerals and other abrasives can spray (throwing) on the ASTM A106 A53 Gr. B Carbon Steel Seamless Fluid Pipe surface under the centrifugal force, which can not only completely remove rust, oxides and dirt, but also achieve the required uniform roughness under the action of strong impact and friction of abrasives. After spraying (throwing) and removing rust, not only the physical adsorption on the pipe surface can be expanded, but also the mechanical adhesion between the anticorrosive coating and the pipe surface can be enhanced. Therefore, spraying (throwing) is an ideal way to remove rust. Generally speaking, shot blasting (sand) is mainly used for inner surface treatment of pipes, while shot blasting (sand) is mainly used for outer surface treatment of pipes.